Features:
German technology
For professional applications
Rapid adhesion
Fast drying formula
Resistance of glue joint against water and detergent
Applications:
S.B.R based, suitable for shoe & leather industries, carpet, rubber and fabric
Packing:
200 gr tin can, 24 pcs/carton
700 gr tin can, 12 pcs/carton
17 liter pail
Features:
100% imported Raw material
Excellent strength
Rapid bonding
Odorless
Durable
Ease of use (soft & flexible bottle)
With storage baasket
Applications:
Wood, MDF, stone, ceramic, glass, rubber
Packing:
400 ml 24 pcs/carton
Features:
Can be rough, hewed, cleaned and painted after being hard in 2 or 4 hours
Stickable to all kinds of building materials except silicone Teflon, polyethylene, and polypropylene
Resistant to every kind of weather condition and moisture
It isn’t easily inflammable.
Applications:
Fixing and insulating door and window frames
Filling cavities in stones, bricks, concrete and plaster
Filling gaps in lofts & roofs, between brickwork, cladding, around ductwork and through cavities carrying pipes and cables
Creation of acoustic and thermal insulation
Insulating warm and cold water pipes
Packing:
750 ml spray, 16 pcs/carton
Features:
German technology
Outstanding temperature resistance to 330°C
Neutral formula
Low odor
Suitable for oxygen sensor equipped engines
Excellent resistance against petrol, diesel & biodiesel fuels, oils, grease, lubricants, water, seawater, sunlight and ozone
Non corrosive
Optimum cure rate
Permanent elasticity
Applications:
All surfaces in engine, gearboxe, drive axle & cylinder
Excellently suited for rough sealing surface
All usage in all motors, modern vehicles and heavy duties
Packing:
Tube 85 gr – 25 pcs/carton
Color:
Dark gray
Properties:
Modified type of seam sealer
Using in very large areas and gaps where the seam sealer is unusable
Lighter than seam sealer and easily extruded up to 4 cm thickness
Very high tensile and shear strength
Excellent compatibile with ED and Primers
Application:
Suitable for using on the door and hood gaps
In the waterways of the roof and around car lights
packaging:
250 kg drums
Properties:
For soundproofing and sealing of the vehicle cabin
Higher theology than other plastisols, easily extruded up to 2cm thickness
Thermal resistant
Resistant to possible stresses inside the body
Application:
Applicable by nozzle on the door and hood joints
Also used in car roof gutter, door protector and around car lights
packaging:
250 kg drums
1200 kg tankers
Properties:
Proper rheolopy for thickening of car underbody up to 1500 microns without sapping Use with conic spray and flat shape nozzles
Application:
Protecting the vehicle’s underbody against stone chipping and humidity Enhancing resistance of car underbody against decay
packaging:
250 kg drums
1200 kg tankers
Properties:
Sprayable and extrudeable
Resistant to corrosion, humidity, impact, bending and stone chips Compatible with ED and primer
Long expiration date
Application:
Used for soundproofinp and sealing in the vehicle’s cabin and preventing abrasion under the car body
packaging:
200 kg drums
1200 kg tankers
Features:
Modified oxim with customized formula for car trims
100% imported raw material
High resistance to water, UV radiation, ozone and chemicals
No shrinkage when cured
Non corrosive
Very good adhesion on different types of surfaces
Applications:
Automotive trim, mirror, headlight, decorative parts, polymer surfaces, glass and steel
Packing:
30 gr tube, 120 pcs/carton
30 gr blister tube, 80 pcs/carton
Color:
2 colors of Black, transparent
Permanently elastic sealant used in the automotive industry for the sealing process on rear & front windshield, with Excellent UV stability
Primer
Adhesion promoter on paint and other surfaces
Cleaner
Beta clean is a cleaner for removing dust, dirt and grease from plastic, painted and glass surfaces
Features:
– BETAGUARD 2010/5
BIFUNCTIONAL COATING is a low density sprayable and extrudable PVC plastisol, especially developed to protect cars underbody against stone chipping; with a 500 μ m dry coating there is a high performance of abrasion and corrosion resistance, after curing in the paint-shop ovens. Paint
Compatibility is good with current surfacers and top coat/clear coat, and enables it to be sprayed on visible areas (sill section).
– SETTING SEALER (EP 268)
SETTING SEALER is an extudable PVC, especially developed for antiflutter
Application (i.e.: extrusion between stiffeners and panels); thanks to its high-modulus properties, it acts as a semi-structural product. Its anticorrosion properties are also excellent.
Jellification (hardening) is effective after curing in the paint-shop ovens.
Excellent sag-resistance of DAQIQCHIMIE’s SETTING SEALER permits to use it as a gap-filler (e.g.: underbody extrusion for gap obturation).
– UNDER BODY COATING (UBC)
UBC is a sprayable PVC plastisol, especially developed to protect cars underbody against stone chipping; with a 500 μ m dry coating there is a high performance of abrasion and corrosion resistance, after curing in the paint-shop ovens. Paint compatibility is good with current surface s and top coat /clear coat, and enables it to be sprayed on visible areas (sill section).
– SEAM SEALER
SEAM SEALER can be used as a seam sealer, extruded application for visible sealing (as hem flange Coverage).
– BETA CLEAN 3600
BETACLEAN 3600 is a cleaner for removing PVC palastisol products from machine and filters.
